Plumbers in Raleigh-Durham
Leaks, clogs, water heaters and fixture installs. Tell us what's going on and we'll connect you with a small group of local plumbers who do that kind of work near you.
Free · No obligation · About 2 minutes
How it works
What happens when you post
01
Describe the job
Answer a few quick questions and add photos if you have them. It takes about two minutes.
02
Hear from local plumbers
We send your request to a small group of plumbers near Raleigh-Durham who do this kind of work, not a crowd.
03
Compare and choose
Message pros directly, ask questions and pick the one that fits. There's no obligation to hire.
Costs
What plumbing costs in Raleigh-Durham
Typical 2026 price ranges for common jobs in the Triangle.
| Job | Typical cost |
|---|---|
| Faucet repair or replacement | $150 – $350 |
| Clogged drain clearing | $150 – $350 |
| Toilet repair | $125 – $300 |
| Toilet replacement (installed) | $350 – $800 |
| Garbage disposal install | $200 – $450 |
| Burst or leaking pipe repair | $250 – $1,000+ |
| Tank water heater replacement | $1,400 – $2,800 |
| Tankless water heater install | $3,000 – $5,500 |
Most plumbers charge a trip or diagnostic fee, often credited toward the repair. After-hours and weekend emergency calls typically cost more. These are estimates to help you plan, not quotes. Your price depends on the job, access and materials.
Common jobs
What local plumbers can help with
Leaks and drips
Faucets, supply lines, shut-off valves and under-sink leaks before they become water damage.
Clogs and drains
Kitchen sinks, showers and main-line backups, including camera inspections for repeat clogs.
Toilets
Running, rocking or leaking toilets, plus full replacements and comfort-height upgrades.
Water heaters
Repairs, tank replacements and tankless conversions, including permits where required.
Pipes
Burst or frozen pipes, repiping older galvanized or polybutylene lines, and new runs for remodels.
Fixtures and appliances
Sinks, showers, disposals, dishwasher and ice-maker hookups.
Hiring tips
Before you hire a plumber
Ask for their North Carolina plumbing license number. Plumbers are licensed by the NC State Board of Examiners of Plumbing, Heating & Fire Sprinkler Contractors, and you can look the number up on the board's website.
Confirm they carry liability insurance.
Ask whether the job needs a permit. Water heater replacements usually do.
Get the price in writing before work starts, including any trip fee.
Ask what the warranty covers, both parts and labor.
FAQ
Common questions
How much does a plumber cost in the Raleigh-Durham area?
Small repairs like a faucet or a clogged drain usually run $150 to $350. Bigger jobs like a water heater replacement run $1,400 to $2,800 for a standard tank. Most plumbers charge a trip or diagnostic fee that's often credited toward the repair.
What should I do if a pipe bursts?
Shut off the main water valve right away. It's usually where the water line enters the house, in a crawl space, garage or utility closet. Then open a faucet to drain the pressure, move valuables away from the water and post your job so a plumber can get to you.
Do plumbers in North Carolina need a license?
Yes. Plumbing contractors in North Carolina must be licensed by the State Board of Examiners of Plumbing, Heating & Fire Sprinkler Contractors. Ask for the license number and check it on the board's website before work starts.
Do I need a permit to replace a water heater?
Usually, yes. Most Triangle cities and counties require a permit for water heater replacement. A licensed plumber will normally pull it for you as part of the job.
How does BeeLocal work?
Describe the job in a couple of minutes. We match it with a small group of local plumbers who do that work in your area, and you message them directly to compare and choose. It's free for homeowners and there's no obligation to hire.
Need a plumber
in Raleigh-Durham?
Tell us what you need. It's free and there's no obligation to hire.