Outlets, lighting, ceiling fans, panels and EV chargers. Tell us what you need and we'll connect you with a small group of local electricians who do that kind of work near you.
Free · No obligation · About 2 minutes
How it works
01
Answer a few quick questions and add photos if you have them. It takes about two minutes.
02
We send your request to a small group of electricians near Apex who do this kind of work, not a crowd.
03
Message pros directly, ask questions and pick the one that fits. There's no obligation to hire.
Costs
Typical 2026 price ranges for common jobs in the Triangle.
| Job | Typical cost |
|---|---|
| Outlet or switch install / replace | $120 – $250 |
| Light fixture install | $120 – $300 |
| Ceiling fan install | $150 – $400 |
| GFCI outlet (kitchen, bath, outdoor) | $150 – $300 |
| Whole-home surge protector | $300 – $700 |
| Level 2 EV charger install | $800 – $2,000 |
| Generator interlock or transfer switch | $500 – $1,500 |
| Electrical panel upgrade (200 amp) | $1,800 – $4,000 |
Ranges cover labor and standard parts. Fixtures, fans and chargers you supply yourself aren't included. Panel and EV charger work usually needs a permit, which adds to the cost. These are estimates to help you plan, not quotes. Your price depends on the job, access and materials.
Common jobs
New outlets, dead outlets, GFCI protection, USB outlets and dimmer switches.
Fixtures, recessed lights, under-cabinet lighting and outdoor lighting.
New installs on existing boxes, fan-rated box upgrades and replacements.
Breakers that keep tripping, panel upgrades and replacing outdated panels.
Level 2 charger installs, including a new circuit and permit.
Surge protection, smoke detector wiring and generator hookups.
Wake County
Apex has grown quickly. Much of the town is 2000s and newer construction, with a historic core of older homes around downtown Salem Street.
Many Apex homes were built with EV-friendly garages but not the circuit. A Level 2 charger install is one of the most common electrical jobs here.
Permits in Apex go through the Town of Apex's building inspections office.
Hiring tips
Ask for their North Carolina electrical contractor license. Electricians are licensed by the NC State Board of Examiners of Electrical Contractors, and you can check the number on the board's website.
Confirm they carry liability insurance.
Ask whether a permit and inspection are needed. Panel, EV charger and new-circuit work usually require both.
Get a written quote that says who supplies the fixture or charger.
Ask how they'll handle anything unsafe they find once walls or the panel are open.
FAQ
Simple jobs like replacing an outlet or installing a light fixture usually run $120 to $300. Larger jobs cost more: a Level 2 EV charger is typically $800 to $2,000 installed, and a 200-amp panel upgrade runs $1,800 to $4,000.
Usually too much load on one circuit, such as a space heater and a hair dryer together, or a fault in a device or wire. If it trips again after you unplug things, stop resetting it and have an electrician check the circuit.
Yes. Electrical contractors in North Carolina must be licensed by the State Board of Examiners of Electrical Contractors. Ask for the license number and check it on the board's website before hiring.
In most of the Triangle, yes. A Level 2 charger usually needs a new 240-volt circuit, which requires a permit and inspection. A licensed electrician normally handles both.
Describe the job in a couple of minutes. We match it with a small group of local electricians who do that work in your area, and you message them directly to compare and choose. It's free for homeowners and there's no obligation to hire.
Tell us what you need. It's free and there's no obligation to hire.